The characteristics of rotor (rotor spinning) yarn and its main differences from ring spinning are as follows: The strength The strength of rotor spun yarn is lower than that of ring spun yarn because there are many bending, looping, folding and winding fibers in rotor spun yarn, and the transfer degree of inner and outer
Compound preparation For cots, rubber mixing is a key link. Generally, there are more than 10 kinds of rubber materials from natural rubber, synthetic rubber to special materials, with a rubber content of 25% ~ 85% and a hardness of soil (0 ~ 90), spanning a great range. Forming Cot molding is mainly to paste
SPECIAL FEATURES Standard working width 280cm Working speed up to 38 mt/min Sewing stitch length from 5 up to 12 mm adjustable in real time. Up to 3400 sewing stitch for minute Two fabric tension control systems, indipendents adjustable in real time. 1 Adjustable fabric tension in sewing phase 2 Adjustable fabric tension in doubling
Working principle Waste collection unit is a mech-electrical unit consisted of the first- stage disc prefilter and the second stage multiple round cage dust-filter. The first stage filter is used to extract, separate, collect the fibrous dust in the processing air. The second stage filter out the fine dust from the air exhausted from the
Blowroom process： The processing of raw cotton or various staple fibers into yarn needs to go through a series of spinning processes. And the opening and cleaning process is the first process in the spinning process. The opening and cleaning combine of this process completes the following tasks: Opening Loosen the pressed block fiber in the
